Table of Contents
Advertisement
ICAM by Xtralis
11 Specifications
Number of Detectors
(not supplied)
Filtration
Flow Monitoring
Supply Voltage
Relay Contact Ratings
Maximum Supply Current
Maximum Pipe Length
Environmental Protection
Operating Temperature
Operating Humidity
Approvals
Approvals
Approvals
Certification
11.1 Typical Supply Current & Fan Speed
Bargraph Value
Fan Speed
Current (mA)
Note: Typical current consumption figures for different fan speeds. Results are based upon an IAS-1
installation with 10 m (33 ft) of standard, 25 mm (0.98 in.) aspirating pipe per channel. The unit was
powered from a 24 VDC power supply.
www.xtralis.com
1 or 2 Analog Addressable or Conventional
Single stage dust particle filter
Thermal device, high and low thresholds. 10 element bar graph
indication. Loop or relay fault reporting.
18 - 30 VDC (24 VDC Nominal)
1 A @ 30 VDC
350 mA @ 24 VDC with no aspirating pipe. See table below for typical
Currents/Fan Speeds
Up to 60 m for a single pipe and 35 m + 35 m for a tee configuration
IP65 with exhaust fitted (IP23 without)
-10 to 60ºC
10 to 95% RH (non-condensing)
AS 1603.8 by CSIRO (under ActivFire scheme)
EN54-20 by VdS (G206066)
AS 1603.8 by CSIRO (under ActivFire scheme)
EN54-20 by VdS (Gxxxxx)
EN61000-6-3:2001(+A11:2004) (EMC)
EN60950-1:2006 (Safety)
CPD (89/106/EEC)
0
1
2
3
1
2
3
4
110
120
130
150
IAS-1 Product Guide
4
5
6
7
5
6
7
8
170
190
220
235
8
9
9
10
265
300
29
Hide quick links:
Advertisement
Table of Contents
