Installing The Camera Without The Speaker - VADDIO ConferenceSHOT AV Installation Manual

Installation Guide for ConferenceSHOT AV Enterprise-Class Conferencing System

Installing the Camera without the Speaker

Caution
Before you start, be sure you can identify all cables correctly. Connecting a cable to the wrong port can
result in equipment damage.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
1. Route the cables through the opening in the mounting shelf.
2. Connect all required cables to the camera.
3. Secure the camera to the mounting shelf using the mounting screw (¼-20 x .375 in.) supplied with the
camera.
Note
If the camera is jostled or bumped, it may require a pan-tilt reset.
16