Uberhaus Gazebo Operator's Manual page 9

Fig. 12: Attach top short beam 1 / top short beam 2 (L1/L2) to the slanted beam (K1) with screws (FF) and washers (BB).
Then attach top middle beam 1/ top middle beam 2 (M1/M2) to the slanted beam (K1) and middle beam (K2) with screws
(FF) and washers (BB) as shown.
Fig. 13: Attach top long beam 1/ top long beam 2 (N1 /N2) to the middle beam (K2) with screws (FF) and washers (BB).
Fig. 14: Attach top long beam 1/ top long beam 2 (N1 /N2) to the slanted beam (K1) with screws (FF) and washers (BB).
Fig. 15: Place the big top cover (O) onto the top connector (J) and, then screw the hook (P) to the big top cover (O). Do not
fully tighten bolts at this stage.
Hardware pack 3
Part
BB
FF
II
JJ
GG
Description
M6 washer
M6X15 screw
M6X40 screw
Φ8*260mm stake
Ring
Quantity
56
48
8
16
48
Image