Uberhaus Gazebo Operator's Manual page 7

Fig. 1: Insert decorative railing 1 (E1) into decorative railing 2 (E2) and attach them with bolts (AA) and washers (BB).
Fig. 2: Attach top the bar connector (H) at the junction of decorative railing 1 (E1) and decorative railing 2 (E2) with bolts
(AA) and washers (BB).
Fig. 3: Attach the mosquito net bar (I) to assembled decorative railing 1 (E1) and decorative railing 2 (E2) with bolts (AA)
and washers (BB).
Fig. 4: Attach the base cover (B) to the post (A), then install the base (C) to the post (A) with screws (FF) and washers (BB).
Fig. 5: With some help, raise the assembled top structure onto the posts, then attach each post (A) at the corners with bolts
(AA) and washers (BB).
Fig. 6: Attach the corner support (F) to decorative railing 1 (E1) and decorative railing 2 (E2) with bolts (AA) and washers
(BB).