Uberhaus Gazebo Operator's Manual page 8

Hardware Pack 2
Part
AA
BB
DD
EE
FF
Fig. 8: Attach the slanted beam (K1) and middle beam (K2) to the top connector (J) with bolts (AA) and washers (BB).
Fig. 9: Attach the lower side of the slanted beam (K1) to the post (A) with bolts (DD), washers (BB), and nuts (EE).
Fig. 10: Attach the lower side of middle beam (K2) to top bar connector (H) with screws (DD), washers (BB) and nuts (EE).
Fig. 11: Attach the lower side of top short beam 1 / top short beam 2 (L1/L2) to the middle beam (K2) with screws (FF) and
washers (BB).
Fig. 7: Attach the triangle support (D) to each post (A)
and roof bar with bolts (HH) and washers (BB).
Description Quantity
M6X20 bolt
M6 washer
M6X55 bolt
M6 nut
M6X15 screw
16
96
16
16
48
Image