Table of Contents
Advertisement
SECTION 1
1.8 Safety References
The following nationally recognized publications on safety in welding
and cutting operations are recommended. These publications have
been prepared to protect persons from injury or illness and to protect
property from damage, which could result from unsafe practices.
Although some of these publications are not related specifically to this
type of industrial cutting apparatus, the principles of safety apply
equally.
"Precautions and Safe Practices in Welding and Cutting with
Oxygen-Fuel Gas Equipment," Form 2035. ESAB Cutting
Systems.
"Precautions and Safe Practices for Electric Welding and Cutting,"
Form 52-529. ESAB Cutting Systems.
"Safety in Welding and Cutting" - ANSI Z 49.1, American Welding
Society, 2501 NW 7th Street, Miami, Florida, 33125.
"Recommended Safe Practices for Shielded Gases for Welding and
Plasma Arc Cutting" - AWS C5.10-94, American Welding Society.
"Recommended Practices for Plasma Arc Welding" - AWS C5.1,
American Welding Society.
"Recommended Practices for Arc Cutting" - AWS C5.2, American
Welding Society.
"Safe Practices" - AWS SP, American Welding Society.
"Standard for Fire Protection in Use of Cutting and Welding
Procedures" - NFPA 51B, National Fire Protection Association, 60
Batterymarch Street, Boston, Massachusetts, 02110.
"Standard for Installation and Operation of Oxygen - Fuel Gas
Systems for Welding and Cutting" - NFPA 51, National Fire
Protection Association.
"Safety Precautions for Oxygen, Nitrogen, Argon, Helium, Carbon
Dioxide, Hydrogen, and Acetylene," Form 3499. ESAB Cutting
Systems. Obtainable through your ESAB representative or local
distributor.
"Design and Installation of Oxygen Piping Systems," Form 5110.
ESAB Cutting Systems.
"Precautions for Safe Handling of Compressed Gases in
Cylinders", CGA Standard P-1, Compressed Gas Association.
Literature applicable to safe practices in welding and cutting with
gaseous materials is also available from the Compressed Gas
Association, Inc., 500 Fifth Ave., New York, NY 10036.
ESP-400CPlasma Power Source
ESP-400CPlasma Power Source
ESP-400CPlasma Power Source
ESP-400CPlasma Power Source
SAFETY
1-9
Advertisement
Table of Contents
