Table of Contents
Advertisement
SECTION 7
7.1 General
7.2 Ordering
Always provide the serial number of the unit on
which the parts will be used. The serial number is
stamped on the unit nameplate.
To ensure proper operation, it is recommended
that only genuine ESAB parts and products be
used with this equipment. The use of non-ESAB
parts may void your warranty.
Replacement parts may be ordered from your
ESAB Distributor or from:
ESAB Welding and Cutting Products
ATTN: Customer Service Department
PO Box 100545 Ebenezer Road
Florence, SC USA 29501-0545
Phone (843) 664-4405
ESAB Cutting Systems - Canada
6010 Tomken Road
Mississauga, Ontario, Canada L5T 1X9
Phone (905) 670-0220
Fax
ESAB Cutting Systems GmbH
Robert-Bosch-Strasse 20
P.O. Box 1128
D-61184 Karben
Phone +011 49 60 39 400
Fax
http://www.esab.de
Be sure to indicate any special shipping
instructions when ordering replacement parts.
Refer to the Communications Guide located on
the last page of this manual for a list of customer
service phone numbers.
ESP 400C Plasma Power Source
Replacement Parts
(800) ESAB-123 (372-3123)
(905) 670-4879
+011 49 60 39 40301 02
7-1
Advertisement
Table of Contents
