Technical Data; Preparing The Tool For Use - Hilti BX 3-ME Original Operating Instructions

3.9 Items supplied
BX 3-ME fastening tool, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4

Technical data

4.1 Fastening tool
Weight
Nail length (collated nails)
Nail length (single nails)
Nail diameter
Magazine capacity
Compression stroke
Contact pressure
Application temperature (ambient temperature)
Recommended maximum fastening rate
Rated voltage
Battery operating voltage
4.2 Battery
Battery operating voltage
Ambient temperature
Storage temperature
5

Preparing the tool for use

5.1 Charging the battery
1. Remove the battery. → page 9
2. Charge the battery in accordance with the information provided in the operating instructions for the
charger.
5.2 Inserting the battery
In order to achieve maximum battery lifetime, replace the discharged battery with a fully charged
battery as soon as there is a clearly perceptible drop in battery performance.
1. Check that the contacts on the battery and on the tool are free of foreign matter.
8 English
Printed: 19.07.2018 | Doc-Nr: PUB / 5377482 / 000 / 02
B 22/2.6 Li­Ion (02)
B 22/3.0 Li­Ion (01)
B 22/5.2 Li-Ion (01)
2
8.4 lb
(3.8 kg)
8.6 lb
(3.9 kg)
9.0 lb
(4.1 kg)
0.6 in ... 0.9 in
(14 mm ... 24 mm)
1.2 in ... 1.4 in
(30 mm ... 36 mm)
0.12 in
(3.0 mm)
20 nails
0.5 in
(12 mm)
11 lb ... 16 lb
f f
(50 N ... 70 N)
5 ℉ ... 122 ℉
(−15 ℃ ... 50 ℃)
650/h
21.6 V
21.6 V
21.6 V
14 ℉ ... 140 ℉
(−10 ℃ ... 60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
2184329
*2184329*