Table of Contents
Advertisement
1
Operating instructions
1
Manufacturer's certificate
2.9 PT 10 set - associated items in separate box
1
PTA 10 optical level with camera
2.10 PT 10 set - associated items in Hilti toolbox
1
PTA 20 calibration tool
1
Mains adaptor
1
Operating instructions
1
Manufacturer's certificate
3 Accessories
Designation
PP tripod adapter for pipe laser
Tripod adapter
Disc or accessory
Mains adaptor
Table of Hilti tools
4 Technical data
Right of technical changes reserved.
Measuring time in seconds
Operating status indicators
Power supply
Operating temperature range
Storage temperature
Protection against dust and water spray
Tripod thread
Weight
Dimensions
5 Safety instructions
WARNING! Read all safety instructions and other in-
structions. Failure to observe the safety precautions and
instructions may result in electric shock, fire and/or seri-
ous injury. Keep all safety precautions and instructions
for future reference.
5.1 General safety rules
a) Check the condition of the tool before use. If the
tool is found to be damaged, have it repaired at a
Hilti service center.
Description
PPA 73
PTA 70
PTAW 80
PTAW 10
Max. 50
LED
DC voltage 6 V: 0.2 A
+10...+35°C
+0...+50°C
IP 54 (protection against dust and water spray)
BSW: ⁵⁄₈"
36.4 kg
600 mm X 190 mm X 520 mm
b) The tool must be checked at a Hilti service center
after it has been dropped or subjected to other
mechanical stresses.
c) The tool is intended exclusively for indoor use.
d) Before operating the tool, check that it is com-
plete and standing or secured in a stable position.
e) The tool and its ancillary equipment may present
hazards when used incorrectly by untrained per-
sonnel or when used not as directed.
en
13
Advertisement
Table of Contents
