Technical Data - Hilti NURON SJT 6-22 Manual

Status
Position 2
Position 3
3.8 Anti-splinter insert
The product can be equipped with an anti-splinter insert.
The anti-splinter insert helps prevent splintering on the surface of wood materials when cutting.
3.9 Automatic product switch-off
If the on/off switch is pressed continuously for longer than 15 minutes (e.g. during transport or storage), the
product switches itself off automatically. This prevents deep discharge of the battery.
3.10 Items supplied
Orbital-action jig saw with saw blade, guard, dust removal adapter, anti-splinter insert, operating instructions,
hex key.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
4

Technical data

4.1 Orbital-action jig saw
Rated voltage
Weight in accordance with EPTA Procedure 01, without battery
Stroke length
Stroke rate under no load (n
Maximum cutting performance in wood
Maximum cutting performance in aluminum
Maximum cutting performance in unalloyed steel
Cutting angle (left/right)
Suction adapter outside diameter
Storage temperature
Ambient temperature for operation
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Sound power level (L
WA
Uncertainty for the sound power level (K
8 English
)
0
)
)
WA
Meaning
Medium orbital action
High orbital action
2264217
*2264217*
SJT 6-22
21.6 V
2.1 kg
28 mm
800 /min ... 3,000 /min
150 mm
25 mm
10 mm
0° ... 45°
27.5 mm
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
SJT 6-22
99 dB(A)
5 dB(A)