Table of Contents
Advertisement
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
coin-cell
battery.
4. Remove the
display
assembly.
About this task
The figure indicates the location of the I/O board and provides a visual representation of the removal procedure.
Steps
1. Peel off the tape that secures the I/O-board cable to the I/O board.
2. Open the latch and disconnect the I/O-board cable from the I/O board.
3. Disconnect the fan cable from the I/O board.
4. Open the latch and disconnect the fingerprint-reader cable from the I/O board.
5. Remove the two screws (M2x2) that secure the I/O board to the palm-rest and keyboard assembly.
6. Lift the I/O board off the palm-rest and keyboard assembly.
Installing the I/O board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Before working inside your
computer.
Removing and installing components
49
Advertisement
Table of Contents
