Removing The M.2 2280 Solid-State Drive From M.2 Slot Two - Dell Inspiron 15 5508 Service Manual

Table of Contents

Advertisement

Steps
1. Slide the solid-state drive mounting bracket into the slot on the palm-rest and keyboard assembly, if it is not installed.
2. Align the notches on the solid-state drive with the tabs in the M.2 slot two on the system board.
3. Slide the solid-state drive into the M.2 slot two on the system board.
4. Replace the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Removing the M.2 2280 solid-state drive from M.2 slot
two
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
NOTE:
This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in M.2 slot two.
NOTE:
Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2
2280 solid-state drive in M.2 slot two.
The following image indicates the location of the M.2 2280 solid-state drive/Intel Optane memory module that is installed in M.2 slot two
and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

P102f

Table of Contents