Steps
1. Align the notches on the solid-state drive/Intel Optane memory module with the tabs in the M.2 slot two on the system board.
2. Slide the solid-state drive/Intel Optane memory module into the M.2 slot two on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane memory module to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The figure indicates the location of the wireless card and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
29