Installing And Removing The Replaceable Plugs; Connecting The Drive To Your Computer - Toshiba CANVIO FOR DESKTOP User Manual

Installing and Removing the Replaceable Plugs

To install and remove the AC adapter replaceable plugs, see the illustrations below.

Connecting the drive to your computer

3
4
1 2 5
8

Air Vent

USB 3.0 port

DC IN 12V Jack

DC output plug
1. Turn off your computer.
2. Plug the AC adapter's DC output plug into the DC IN 12V jack of the drive and the power cord into a live wall
outlet.
3. Plug the USB 3.0 Standard-A connector into a USB port of your host system or an active USB HUB.
You may need USB 3.0 Express Card Host Controller for your computer if the computer doesn't have
NOTE
USB 3.0 port. You also can connect the device to USB 2.0 port of your computer, However the transfer
rate will be downgraded to that of USB 2.0.
4. Now, plug the USB 3.0 Type B connector into the corresponding port of the drive itself.
User's Manual - CANVIO FOR DESKTOP
6
7

USB 3.0 Type B micro connector

USB 3.0 standard Type A connector

USB 3.0 host port, backward compatible with USB 2.0

Power/Data indicator light
EN_4