Nibe F1145 Series Installation Manual page 62

8
D
9
7
C
TIP
The cooling module is installed in reverse order.
NOTE
At reinstallation, the supplied O-rings must re-
place the existing ones at the connections to
the heat pump (see image).
F1145
QM34
USB SERVICE OUTLET
The display unit is equipped with a USB socket that can
be used to update the software and save logged inform-
ation in F1145.
62 Chapter 9 | Service
5
6
A
B
QM33
QM32
INDOOR CLIMATE
USB
HEAT PUMP
update firmware
logging
manage settings
When a USB memory is connected, a new menu (menu
7) appears in the display.
Menu 7.1 - update firmware
update firmware7.1
start updating
choose another file
This allows you to update the software in F1145.
NOTE
For the following functions to work the USB
memory must contain files with software for
F1145 from NIBE.
The fact box at the top of the display shows information
(always in English) of the most probable update that the
update software has selected form the USB memory.
This information states the product for which the soft-
ware is intended, the software version and general in-
formation about it. If you want a file other than the one
selected, the correct file can be selected through
"choose another file".
HOT WATER
INFO
USB 7
NIBE F1145