Table of Contents
Advertisement
line
Resume a call on current line
Release a call on different line
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow-green and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Talk to the transfer recipient
before transferring a call
(consult transfer)
Transferred to idle lines or
other numbers without
talking to the transfer
recipient
(Blind transfer)
Blind transfer to the
held line
3.5.11 Using Mute
With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use mute in conjunction with the handset, speakerphone,
or a headset。
Toggle Mute on
Toggle Mute off
3.5.12 Do Not Disturb
www.escene.cn/en/
--Press Line button,
Select the line want to release hold, press the line, so recovery;
--1) Press TRANSFER button or press XFER.
--2) Enter number.
--3) press "#" （default),
-or press
then transfer the call,
-or wait five seconds(default)then transfer the call
--1) Press TRANSFER button or XFER.
--2) Press
;
--3) Enter number.
--4) Press "#" （default)
-or press
, then transfer the call.
-or wait five seconds(default)then transfer the call
--1) Press TRANSFER button or press XFER.
--2) Press the Line button of held line
Press C button, then the screen top and left will have a MUTE icon
Press C button again, then the button lights off
Escene Communication
Advertisement
Table of Contents
