Using Hold And Recover (Switch Calling Line); Transferring Calls - Escene SayHi ES280 User Manual

Hang up while using the
Handset
Hang up while using the
Speakerphone
Hang up while using the
Headset
Hang up one call, but
preserve another call on
the other line

3.5.9 Using Hold and Recover (Switch Calling Line)

You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result of that,
you can switch different calling line on our phone.
If you want to...
Put a call on hold
Hold a line and switch to
another line
Resume a call on current
line
Release a call on different
line
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow green

3.5.10 Transferring Calls

Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Talk to the transfer
recipient before --2) Enter number.
transferring a call
(consult transfer)
Transferred to idle
lines or other
numbers without
talking to the transfer --3) Enter number.
recipient
(Blind transfer)
--Return the handset to its cradle,
-or press End
--Press Speaker button that is Red
-or press Line button for the appropriate line,
-or press End
--Press Handset button, （Do not keep the headset mode),
-or press End (keep the headset mode)
--Press End,
-or refer to the above three methods
--Press HOLD button,
-or press soft key
Press another Line button for the appropriate line
--Press Line button,
Select the line want to release hold, press the line, so recovery;
and flashing Line button or Hold in the LCD.
--1) Press TRANSFER button or press XFER.
--3) press "#" （default),
-or press then transfer the call,
-or wait five seconds(default)then transfer the call
--1) Press TRANSFER button or XFER.
--2) Press ;
--4) Press "#" （default)
-or press , then transfer the call.
Escene Communication
,
Then...
www.escene.cn/en/