Table of Contents
Advertisement
--2）Press MENU button> System Setting> Phone Setting> Volume Setting
--3）Volume Setting: Handset\Speaker\Headset\Ring volume
--4) Press Enter to adjust the volume and press Save to make it work
NOTES: For the Custom Ring Type you need to upload it from website.
3.7.5 Searching Phone Book
Accurate Search
--1）Press MENU button
--2) Then press Enable/Disable and Save.
--3) When you back to idle, you can use the digital keypad to search the contact.
T9 Search
--1) Press MENU button
--2) Then press Enable/Disable and Save.
--3) When you back to idle, you can use the digital keypad to search the contact.
NOTES: The Search Phone Book setting default is Accurate Search.
3.7.6 Cannot Set the Features with Keypad
As below features are cannot setting with the keypad:
1) Dial Plan.
2) Custom Ring Type
3) SNTP Server and Time & Date
4) Update the Firmware or Backup.
4. WEB User Interface
In addition to the phone user interface, you can also customize your phone via web user interface. To access the web user interface, you need to know
the IP address of your new phone. To obtain the IP address, press the C key on the phone. Enter the IP address (e.g. HTTP://192.168.0.10 or
192.168.0.10) in the address bar of web browser on your PC. The default username is root (case-sensitive) and the password is root (case-sensitive).
Main Interface-Phone Status
Here you can see as below information: System Run Time, Register Status, Network Status, System Information,
www.escene.cn/en/
"Function Setting", you can select " Accurate Search "
>
"Function Setting", you can select " T9 search"
>
Escene Communication
Advertisement
Table of Contents
