Page 1
ThermoVault Oven Temperature Profiling System PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Device Operation 3 Device Maintenance 4 Need Help?
Page 2
300 °C (572 °F) 6. Disconnect the data logger from the USB cable. Place 325 °C (617 °F) the logger into the ThermoVault and latch it securely. 350 °C (662 °F) Place it in the environment to measure. Note: The device will stop recording data when the end of memory Installation Guide is reached or the device is stopped.
Page 3
Materials: Small Phillips Head Screwdriver and outside of the alarm parameters. Replacement Battery (LTC-7PN) 1. Open the ThermoVault and remove the data logger. Multiple Start/Stop Mode Activation 2. Puncture the center of the back label with the screw To start device: Press and hold the pushbutton for driver and unscrew the enclosure.
Page 4
NEED HELP? Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.