Advertisement
Quick Links
TC101A
Thermocouple-Based Temperature
Data Logger
PRODUCT
USER GUIDE
To view the full MadgeTech product line, visit
our website at madgetech.com.
TABLE OF CONTENTS
2 Product Overview
2 Installation Guide
2 Wiring the Data Logger
2 Device Operation
4 Device Maintenance
4 Need Help?
Advertisement
Related Manuals for MadgeTech TC101A
Summary of Contents for MadgeTech TC101A
- Page 1 Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Wiring the Data Logger 2 Device Operation 4 Device Maintenance 4 Need Help?
- Page 2 -40 °C to +80 °C (-40 °F to +176 °F) for the data logger body. Installation Guide The TC101A-ST and TC101A-TB have the ability to shield the thermocouple with the ground connection. When using a Installing the Interface Cable 2-wire thermocouple, leave the ground input unconnected.
- Page 3 OK. 1. Select Alarm Settings from the Device Menu in the LED Indicators MadgeTech Software. A window will appear allowing to set the high and low alarms and warning alarms. Green LED blinks: 10 seconds to indicate 2.
- Page 4 Note: Be sure not to over tighten the screws or strip the threads. Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.