Device Operation Operational Warnings Connecting and Starting the Data Logger • When used in hazardous locations, the Temp1000Ex is to 1. Once the software is installed and running, plug the be installed prior to the location becoming hazardous interface cable into the docking station (IFC400 or and removed only after the area is no longer hazardous.
O-ring maintenance is a key factor when properly Downloading Data from a Data Logger caring for the Temp1000Ex. The O-rings ensure a tight 1. Place the logger into the docking station (IFC400 or seal and prevent liquid from entering the inside of the IFC406).
Page 4
FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F). Specifications subject to change. See MadgeTech’s terms and conditions at madgetech.com. DOC-1367036-00 REV 2 2019.12.20...
Annex IV of the directive and issued the QA Notification document: Baseefa19ATEX0126 Declared on behalf of MadgeTech, Inc. Dianne Moulton , Quality Manager Issued from MadgeTech, Inc. Warner, NH USA November 26, 2019...