Auto Power Off; Auto Hold Function; Rs232 Interface (Optional) - HiWeigh HH User Manual

C=1
It beeps when the weight is ok (Lo<weight<Hi)
C=1
It beeps when the weight is out of limitation (Lo>weight or weight>Hi)
5.3

Auto Power Off

UF – 3 Press buttons with arrow to move and change the digits.
Press BMI/Height to enter the set of automatic off function– AoFF 00
00
Auto off deactivated
01-99
Auto off activated in 01-99 minutes, you can change it from 01 minute to 99 minutes
5.4
Backlight
UF – 4 Press HOLD to change the digits.
Press BMI/Height to enter the set of backlight function– Lit
A
Automatic
ON
Backlight On
OFF
Backlight Off
5.5 Auto
Hold Function
UF – 5 Press HOLD to change the digits.
Press BMI/Height to enter the set of auto hold function– hoLd
0
Deactivated
1
dynamic weighing (refer to below remark)
2
Peak hold (press any key to exit except for BMI/Height
3
Stable hold (press any key to exit except for BMI/Height
4
Stable hold (exit automatically when the weight is removed)
Remark
When choose hold = 1, it need to set the following two parameters
1. PCt xxx the number is from 001-100, the bigger number means the more accurate weight, but the
weighing time is longer, the smaller number means fast weighing (shorter stabilizing time) but not so
accurate result, it can be chosen depends on the weighing condition of the scale.
2. TinE x the number it can repeat during the range of hold, it can choose 1/2/4/8/16/32/64
5.6

RS232 Interface (Optional)

UF – 6 Press HOLD to change the digits.
Press BMI/Height to enter the set of RS232 format– 232
Format 1
Stable Output
232 1
Stream Output
232 2
Keyboard Output
232 3
!
A
key)
key)
0
Format 2
Stable Output
232 4
Stream Output
232 5
Keyboard Output
232 6
0
7!