Annual Maintenance Requirements; Pre-Installation Instructions - Pentair CARBON FILTRATION SYSTEM 1.0 Service Manual

• Do not install this system where water is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system.
• This system must be installed in an area that is not affected by extreme heat, cold or the elements.
The selected installation area must be adequate for easy service of all parts.
• This system must be installed in accordance with all applicable state and local laws and regulations.
• This system is designed to treat cold water only and can be installed on any cold water supply.

ANNUAL MAINTENANCE REQUIREMENTS

• Clean the backwash flow control.
• Verify that the flow meter is functioning correctly. Clean the impeller, if necessary.
• Verify the programming of the control. Reprogram, if necessary.
• Verify the minimum and maximum water pressure. Install a pressure reducer, if necessary.
4

PRE-INSTALLATION INSTRUCTIONS