System Information - Pentair CARBON FILTRATION SYSTEM 1.0 Service Manual

Whole house
Hide thumbs Also See for CARBON FILTRATION SYSTEM 1.0:
Table of Contents

Advertisement

You now own the finest Water Treatment System available to homeowners. To enjoy the maximum
benefits of this system, please read the contents of this Owners Manual.
POWER REQUIREMENTS
The computer board receives power from an external wall-mount transformer, supplied with each
system.
Voltage: The voltage supplied to the computer board is 24V AC.
Frequency: The line frequency is 50 Hz or 60 Hz.
WATER PRESSURE
A minimum of 20 pounds of water pressure is required for proper operation of the system. The stated
operating pressure range is 20 psi - 120 psi (138 kPa - 828 kPa).
BYPASS VALVE
The bypass valve enables the customer to bypass the system in situations of: emergency leaks in the
equipment, service calls and/or outdoor water use.
TEMPERATURE OPERATING RANGES
Operating Temperature Range: 40° F - 100° F (4.4° C - 38° C)
Storage Range: The computer board can be stored at temperatures from -20°C (-4°F) to 70°C (158°F).
Humidity: The computer board operates properly with relative humidity from 10% to 95%, non-
condensing.
ENVIRONMENTAL REQUIREMENTS
Location: The water filter and control cannot be exposed to outdoor elements, such as direct sunlight
or atmospheric precipitation. The system may be installed in a covered, open-air structure such as a
carport, residential or commercial building. Weather covers are also available through the Order
Department ( part number 72370 or 71345).
OPERATIONAL SPECIFICATIONS
MODEL
MEDIA AMOUNT
PENTAIR CARBON
FILTRATION
SYSTEM 1.0
PENTAIR CARBON
FILTRATION
SYSTEM 1.5
PENTAIR CARBON
FILTRATION
SYSTEM 2.0

SYSTEM INFORMATION

SERVICE FLOW
RATE
(cu.ft)
(gal/min)
1.0 CARBON
11.6
1.5 CARBON
11.9
2.0 CARBON
13.2
PSI DROP AT
DRAIN FLOW RATE
SERVICE FLOW
(GAL/MIN)
RATE
12
5.0
15
5.0
15
7.0
3

Advertisement

Table of Contents
loading

Table of Contents