Service Menu - Nibe GV-HR 130 Series Installer Manual

Service menu

OVERVIEW
Service menu
1 External component that is not supplied by NIBE.
Sub-menus
Service menu is intended for advanced users. This
menu has several submenus. Under the menus on the
display, there is status information for each menu.
NIBE GV-HR 130
10 - Level 1 supply air
11 - Level 2 supply air
12 - Level 3 supply air
13 - Level 1 exhaust air
14 - Level 2 exhaust air
15 - Level 3 exhaust air
16 - T2 adjustment
17 - Level 3 - 4 h
18 - Filter/stop
19 - Room/on/off
20 - Preheating
21 - Bypass max.
22 - Water control 1
23 - Power regulator
24 - Frost reduction
1
25 - Frost
1
26 - Frost
27 - Auxiliary relay R9
28 - Stop the unit
29 - Interrupt bypass t3
30 - Modbus mode
31 - Modbus address
32 - Humidity max. temp.
33 - Humidity max. value
34 - Humidity ventilation speed
35 - Humidity control frequency
36 -
37 - Air heater PI P
38 - Air heater PI I
39 - Preheating cycle
1
40 - Reheating set
1
41 - Re-heater PI P
1
42 - Re-heater PI I
1
43 - Reheating control
44 - Demand control
45 - Fire damper
MENU 10 - LEVEL 1 SUPPLY AIR
Setting range: 0 - 100%
Factory setting: 30%
Here you set the speed for the supply air fan's lowest
level.
This mode is ideal when there is nobody at home.
MENU 11 - LEVEL 2 SUPPLY AIR
Setting range: 0 - 100%
Factory setting: 50%
Here you set the speed for the supply air fan's normal
level.
Chapter 8 | Control - Menus 25