TEFAL HOME CHEF Smart Pro IH Manual page 23

Problem
Continuous pressure
release from float valve
The limit valve releases
pressure discontinuously
during cooking progress.
"E0" displayed on digital
screen.
"E1" displayed on digital
screen.
"E2" displayed on digital
screen.
"E4" displayed on digital
screen.
"E5" displayed on digital
screen.
"E10" displayed on digital
screen.
Possible reasons
Residue in the float valve.
Float valve is stuck.
Make the temperature in the
pot more even.
Top sensor is in short circuit or
open circuit.
Bottom sensor is in short
circuit or open circuit.
The lid is not in the position
defined for the selected
cooking mode.
Lid switch sensor does not
function.
IGBT NTC does not function.
Temperature of IGBT is too
high.
No cookware
Solutions
Clean and remove the
residue.
Clean and remove the
residue.
Normal.
Send to repair and
maintenance department.
Send to repair and
maintenance department.
Please refer to the cooking
table to check the right
position of the lid for the
program you have selected.
Send to repair and
maintenance department.
Send to repair and
maintenance department.
Check whether the air inlet
and outlet is blocked by
residues or dirts. If yes, clean
and remove the residues
or dirts; If not, send to
repair and maintenance
department.
Put on the right cookware.
EN
23