Allied Telesis AR Series Hardware Reference Manual page 110

110
Figure 67: Example output from the SHOW INSTALL command.
Install Release
------------------------------------------------------------
Temporary -
Preferred flash:load\8-181.rez
Default EPROM (8-1.8.1)
------------------------------------------------------------
Current install
------------------------------------------------------------
Preferred flash:load\8-181.rez
------------------------------------------------------------
Install history
------------------------------------------------------------
No Temporary install selected
Preferred install selected
Preferred release successfully installed
------------------------------------------------------------
Troubleshooting
If the router fails to reboot or functions incorrectly, then the most likely cause is
that there is a problem with the way the boot EPROMs were installed. Repeat
the procedure. Check that the boot EPROMs are in the correct locations and
oriented correctly, using the relevant location diagram as a guide. Check for
bent pins. These should be carefully straightened. Replace the boot EPROMs
and complete the remaining steps.
If the router still fails to reboot, replace the new boot EPROMs with the original
set and contact your distributor or reseller.
AR Router
Patch
-
-
-
-
C613-03031-01 REV E