Cooling System Maintenance; Cleaning The Engine Screen And Engine-Oil Cooler; Cleaning The Engine-Cooling Fins And Shrouds - Toro Z Master 6000 Professional Series Operator's Manual

Cooling System
Maintenance
Cleaning the Engine Screen
and Engine-Oil Cooler
Service Interval: Before each use or daily
Remove any buildup of grass, dirt, or other debris
from the oil cooler (Figure
Figure 78
Before each use, remove any buildup of grass,
dirt, or other debris from the engine screen. This
helps ensure adequate cooling, correct the engine
speed, and reduces the possibility of overheating and
mechanical damage to the engine
78).
(Figure 79).
Cleaning the
Engine-Cooling Fins and
Shrouds
Service Interval: Every 100 hours/Yearly (whichever
1. Disengage the blade-control switch (PTO) and
engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the air-intake screen, the recoil starter,
and the fan housing
4. Clean the debris and grass from the engine
parts.
5. Install the air-intake screen, the recoil starter,
and the fan housing
g008804
g009191
1. Engine guard
2. Engine air-intake screen
3. Bolt
55
comes first)
(Figure 79).
(Figure 79).
Figure 79
4. Fan housing
5. Screw
g004218