Toro Z Master 6000 Professional Series Operator's Manual page 71

Figure 106
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides
of the deck (Figure
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
107).
g009038
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the
up position.
9. Slide the deck out to the right side of the
machine.
71
Figure 107
g009197