Toro Z Master 6000 Professional Series Operator's Manual page 44

2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
Figure 54
(Figure 54).
Changing the Engine Oil
Service Interval: After the first 8 hours
Every 100 hours (more often in dirty or dusty
conditions).
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so it drains better.
2. Park the machine so that the rear is slightly
lower than the front to ensure that the oil drains
g008804
completely.
3. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
g194611
44
EUTRAL
(Figure 55).
Figure 55
-
LOCK
g008804
g027734