Light Barrier Focus - Trotec Speedy 360 fiber Operating Manual

7.6.4

Light barrier focus

Notice
The light barrier autofocus is ideal for flat opaque materials of unknown thickness.
This autofocus option will not wok on transparent, rough or very thin material, which is thinner
as the ruler itself.
ENGLISH (Translation)
1. Select the lens type in the menu bar of JobControl®.
2. Make sure that the lens that is installed in the laser head is
selected.
3. At the same time, press the Away key + Down key to adjust
the height of the machining table so that it moves upwards.
4. Press the Up-button + Down-button simultaneously for the
table to move up.
5. As soon as the previously loaded material passes the light
barriers, the upward movement of the table stops, and the
table moves to the correct focus position.
Focusing is then complete, and you can start the laser
processing.
Operation
71