15.2.3 Safety of Electrical Equipment
According to EN 61010-1 / IEC 61010-1 Safety requirements
for electrical equipment for measurement, control, and
laboratory use – Part 1: General Requirements
15.2.4 Electromagnetic Compatibility
Interference resistance
Suitable for use in industrial areas
Transient emissions
Class B
Suitable for use in residential areas and areas that are
connected to a low voltage network that also supplies
residential buildings .
15.3 Materials
Housing: Die-cast aluminum, plastic PBT, Optiwhite float and stainless steel 1 .4401 | 1 .4404, PA handles,
aluminum trim
Control unit: Plastic PBT, float glass and stainless steel 1 .4301
15.4 Integrated Clock
Maximum deviation per month (RTC)
15.5 Backup Battery
Lithium battery, type CR2032
Service life at room temperature, minimum
Unit
Value
s
30
Unit
Value
Years
10
Cubis
®
MCE Operating Instructions
Technical Data
57