Digital Scrubbing Using The Envelope Function - Fostex D-108 Owner's Manual

D-108 Owner's Manual (Cue & Review Function)

Digital scrubbing using the envelope function

You may perform digital scrubbing using the "Envelope Function" of the D-108 while the recorder section is
stopped. The envelope function allows digital scrubbing for each track recorded. The display will show the
envelope indication of the track selected.
POWER
1. While the recorder section is stopped, depress the
STOP button and then press the RECORD TRACK
select key of the desired record track.
This turns ON the envelope function. The envelope
indication of the selected track will appear on the
display. The following example shows the indication of
track 4 envelope, after RECORD TRACK select key 4 is
pressed. At this time the recorder section is in the STILL
status (scrub mode is in still status) and the REWIND LED
and F FWD lights up.
playback point
OL
0
3
6
9
12
18
24
30
42
4
Track indication
2. You can use the JOG dial to digitally scrub the
performance of the track selected.
The envelope of the performance recorded on the track
variates in real-time. During forward direction scrub the
F FWD LED lights up, and during rewind direction scrub
the REWIND LED lights up.
3. Adjust the monitor sound of the selected track so
that it can be monitored on the mixer.
8 TRACK DIGITAL RECORDER
RECORD TRACK
1/9 2/10 3/11 4/12 5/13 6/14
PUNCH
IN / OUT
LOCKED HD ACCESS
4
44.1kHz
playback point
5
AUTO RTN
CLIPBOARD
AUTO PLAY IN OUT START
COPY MOVE PASTE
AUTO
REHEARSAL
PUNCH
TAKE
OPTICAL
ENVELOPE
RECORD STOP PLAY
7/15 8/16 SHIFT
TC IN CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
1
4. Press the RECORD TRACK select key of the desired
record track to select another track.
[Please Wait!] will briefly appear and then go to the
envelope indication of the selected track. The following
example shows the case when the indication is switched
from track 4 to track 8.
OL
0
3
6
9
12
18
24
30
42
OL
0
3
6
9
12
18
24
30
42
5. Press the STOP button to stop the envelope
function.
Doing so will turn OFF the envelope function. The D-108
will return to the time base indication prior to turning
the envelope function ON.
64
AUTO PUNCH EXECUTE EXIT
IN OUT END DISP SEL /YES /NO
TIME BASE SEL
AUTO RTN
ERASE UNDO REDO HOLD/ STORE RECALL
PGM SEL PREVIEW
LOCATE VARI PITCH
REWIND F FWD
4
8
2
44.1kHz
44.1kHz