Changing The Initial Settings (Setup Mode) - Fostex D-108 Owner's Manual

D-108 Owner's Manual (Changing the initial setting <SETUP mode>)

Changing the Initial Settings (SETUP Mode)

SETUP mode of the D-108 offers the "Changing the initial settings" menus that configure the operating environment
of the D-108, a "Check" menu that enables you to check the number of events of each track, and the "Execution"
menus that execute certain operations, such as save and load.
The "Changing the initial settings" menus include 20 parameters as shown in Table-1 below. These parameters
were set before the unit was shipped from the factory (These values are called the "initial settings."). Modifying
these settings allows you to change the operating environment of the D-108.
The "Check" menu provides one parameter "Checking the number of events" as shown in Table-2.
Also, as shown in Table-3, the "Execution" menus include six items: Title Edit?, Delete. PGM?, Load PGM?, Save
PGM?, and Disk Format?, which you can execute by selecting the corresponding SETUP menu. This chapter
explains how to use the "Changing the initial settings" menus shown in Table-1 and the "Check" menu shown in
Table-2. For more information on the "Execution" menus, refer to the corresponding pages in the "Reference
page" column in Table-3.
Setting a time signature
Setting a Tempo
Setting the metronome function
Setting a preroll time
Setting MIDI sync output signal
Setting an MTC frame rate
Setting an MTC offset value
Setting Offset mode
Setting the slave mode
Setting the reference time code
Setting the slave type
Setting the record protect function
Setting digital input tracks
Setting digital output tracks
Setting BAR/BEAT resolution mode
Setting the MIDI device ID number
Setting the sampling rate
Setting the operating Clock
Setting the sync preset
Setting the current drive
Check of the Event number on the track.
Deleting a Program
Editing a Program title
Saving song data to an external digital device
Loading song data from an external digital device
Formatting an current drive disk
Track swapping
<Table-1> "Changing the initial settings" menu
Parameters
Signature Set ?
Tempo Map Set ?
Click
Preroll Time ?
MIDI Sync OUT ?
Frame Rate ?
MTC OFFSET
Offset Mode ?
Slave Mode ?
Ref. TC ? Void
Slave Type ?
Rec Protect ?
Digi in ?
Digi out ?
Device ID ?
Sample Rate ?
Clock Sel. ?
Sync Preset ?
Drive Sel. ?
Check item
Execution item
Display Default setting
001BAR 4/4
001BAR 1 120
? oFF
00
CLk (Clock)
25 frame
00H 59M 57S 00F 00SF
ABS
oFF
Available with option Model 8345 (Refer to the 8345 manual)
VAri
oFF
L- R-
(No assign)
adat
Resolution ? oFF
00
44.1
Int
Available with option Model 8345 (Refer to the 8345 manual)
IDE
Modes applicable program by program. They can be saved/loaded.
Modes applicable to all programs. They cannot be seved/loaded.
<Table-2> "Check" menu
Display
NOs Of Event ?
<Table-3> "Execution" menu
Display
Delete PGM ?
Title Edit PGM ?
Save PGM ?
Load PGM ?
Disk Format ?
Track Exchange ?
106
Refer page Community
108
109
111
111
112
113
113
114
115
116
117
117
119
120
120
121
122
123 *
Refer page Community
123 -
Refer page Community
37 -
38 -
88 -
88 -
29 -
73 -