Editing And Storing Locate Data; Editing And Storing Data - Fostex D-108 Owner's Manual

D-108 Owner's Manual (Storing a Locate Point <Edit Point>)

Editing and storing locate data

If you know the position of the desired locate point, follow the steps below.
POWER
1. Press the HOLD/> key while the D-108 is stopped.
The currently-displayed time value (or bar/beat/clock value)
is captured and the D-108 enters data edit mode.
2. Press the HOLD/> key, or turn the SHUTTLE dial to
move the flashing cursor on the time value digit, and
use the JOG dial to increase or decrease the value.
3. Press the STORE key.
The [Press LOCATE: ##] menu will appear as indicated
before. Ignore this go to the next step.

Editing and storing data

You can recall data stored in the memory key, edit it, and store it. again
POWER
1. While the D-108 is stopped, press the memory key
that stores the data you wish to edit.
The stored data appears on the display and the D-108
enters data edit mode.
2. Press the HOLD/> key, or turn the SHUTTLE dial to
move the flashing cursor to the time value digit, and
use the JOG dial to increase or decrease the value.
8 TRACK DIGITAL RECORDER
RECORD TRACK
1/9 2/10 3/11 4/12 5/13
PUNCH
IN / OUT
LOCKED HD ACCESS
8 TRACK DIGITAL RECORDER
RECORD TRACK
1/9 2/10 3/11 4/12 5/13 6/14
PUNCH
IN / OUT
LOCKED HD ACCESS
AUTO RTN
CLIPBOARD
AUTO PLAY IN OUT
COPY MOVE PASTE
AUTO
REHEARSAL
PUNCH
TAKE
OPTICAL
ENVELOPE
RECORD STOP
7/15 8/16 SHIFT
6/14
TC IN CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
4. Press the desired memory key.
The STORE LED turns off.
The input time value (or bar/beat/clock value) is stored
in the corresponding memory key.
• Press the STORE key instead of the HOLD/> key in
Step 1 and omit Step 3 to speed operation.
1, 4
AUTO RTN
CLIPBOARD
AUTO PLAY IN OUT START
COPY MOVE PASTE
AUTO
REHEARSAL
PUNCH
TAKE
OPTICAL
ENVELOPE
RECORD STOP PLAY
7/15 8/16 SHIFT
TC IN CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
3. Press the STORE key.
The [Press LOCATE: ##] menu will appear as indicated
before. Ignore this go to the next step.
4. Press the memory key that you pressed in Step 1
again.
The STORE LED will turn off. The edited data is stored,
and the D-108 displays the previous Time Base indication.
56
4
1, 2
AUTO PUNCH EXECUTE EXIT
START IN OUT END DISP SEL /YES /NO
AUTO RTN TIME BASE SEL
ERASE UNDO REDO HOLD/ STORE RECALL
PGM SEL PREVIEW
LOCATE VARI PITCH
PLAY REWIND F FWD
3
2
AUTO PUNCH EXECUTE EXIT
IN OUT END DISP SEL /YES /NO
TIME BASE SEL
AUTO RTN
ERASE UNDO REDO HOLD/ STORE RECALL
PGM SEL PREVIEW
LOCATE VARI PITCH
REWIND F FWD
3
2
2