Connecting A Digital Mixer - Fostex D2424LV Quick Operation Manual

Model D2424LV Quick Operation Guide

Connecting a digital mixer

When making connections with a digital recording mixer, refer to the connecting example below.
<CAUTION>
• When connecting the recorder to a digital mixing console, make sure that the power of both units are
off.
• The [DATA INPUT] and [DATA OUTPUT] connectors do not support adat digital signals of 96-kHz Fs.
In other words, the unit cannot receive of feed an adat digital signal of 96-kHz Fs.
<adat digital signal>
[DATA IN/OUTPUT] 1-8, 9-16 and 17-24 can all be used
for record/playback of adat digital signals.
Signals to [DATA INPUT] 1-8, 9-16 and 17-24 will, re-
spectively, be assigned to tracks 1-8, 9-16 and 17-
24, and recorded.
At playback, the track outputs are respectively
assigned from each [DATA OUTPUT] connectors in
the same manner.
<Note> : Except for 96-kHz Fs adat digital signals.
DATA IN 17-24
DATA IN 9-16
DATA IN 1-8
Digital mixer
TRK 24
TRK 23
TRK 22
TRK 21
DATA OUT 17-24
TRK 20
TRK 19
TRK 18
TRK 17
TRK 16
TRK 15
TRK 14
TRK 13
DATA OUT 9-16
TRK 12
TRK 11
TRK 10
TRK 9
TRK 8
TRK 7
TRK 6
TRK 5
DATA OUT 1-8
TRK 4
TRK 3
TRK 2
TRK 1
<S/P DIF digital signal>
At record/playback of S/P DIF digital signals, in-
put connectors [DATA INPUT] 1-8 only can be used
and the output ports will be [DATA OUTPUT] 1-8, 9-
16 and 17-24.
Signals input to [DATA INPUT] 1-8 will be assigned
and recorded in tracks 1 and 2.
At playback, signals output from track 1-2, 3-4
and 5-6 will be, respectively, assigned and out-
put from [DATA OUTPUT] 1-8, 9-16 and 17-24.
DATA IN 1-8
14
TRK 24
TRK 23
TRK 22
TRK 21
TRK 20
TRK 19
TRK 18
TRK 17
TRK 16
TRK 15
DATA OUT 17-24
TRK 14
DATA OUT 9-16
TRK 13
DATA OUT 1-8
TRK 12
TRK 11
TRK 10
TRK 9
TRK 8
TRK 7
TRK 6
TRK 5
TRK 4
TRK 3
TRK 2
TRK 1