Locking The Brake; Securing Your Child; Adjusting The Handlebar - Burley Encore Owner's Instruction & Safety Manual

Locking the Brake

1. To lock the brake, slide the lever to the right
(Figure 16). To release the brake, slide the lever
to the left.
Figure 16

Securing Your Child

1. Before loading or unloading your children, set the parking
brake. After loading, secure and adjust the harnesses. Snap
shoulder straps & waist straps into 5-point harness buckle
and adjust straps so they are secure (Figure 19). Fasten and
adjust lap belt(s) to fit securely.
2. To remove your children, simply press the yellow release
button on the 5-point harness (Figure 19a).
3. When using double trailer with one child, always seat the child in
the right side position (Figure 20).
WARNING
Avoid serious injury from falling or sliding out.
Always use 5-point harness.
8
ENG

Adjusting the Handlebar

1. Tow mode: Always rotate the handlebar forward when trailer is in towing mode (Figure 17A). The
handlebar should be horizontal and parallel to the ground, such that the mark on the handlebar is aligned
with the bolt that attaches the cover (Figure 18).
2. Stroll / Jog mode: The handlebar may be rotated to serve as a handlebar while trailer is in strolling or
jogging mode (Figure 17B). Open lever to rotate (Figure 18) and close lever to lock in place.
Note: Always use the jogging tether when used as a stroller.
B
A
Figure 19
A
Figure 17
CHILD TRAILER
Figure 18
Figure 20