12.20
Removing the seat
12.21
Mounting the seat
–
Remove screw
S03480-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the two collar bushings of the
fuel tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
H02218-11
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
S03480-10
SERVICE WORK ON THE CHASSIS 12
1
on the left side.
1
on the left side.
M6
10 Nm (7.4 lbf ft)
79