Display Mode Speed/Clk (Time); Setting The Clock; Display Mode Speed/Lap (Lap Time) - KTM 250 EXC TPI 2020 Owner's Manual

7 COMBINATION INSTRUMENT
7.11
7.12
7.13
30

Display mode SPEED/CLK (time)

400319-01

Setting the clock

400319-01

Display mode SPEED/LAP (lap time)

400320-01
–
Repeatedly press the button
bottom right of the display.
The time is shown in display mode CLK.
Press the but- The display changes to the Setup menu of the
ton for 2–3 clock.
seconds.
Briefly press Next display mode
the button .
Press the but- No function
ton for 2–3
seconds.
Briefly press No function
the button .
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button for 2–3 seconds.
Press the but- Increases the value
ton for 2–3
seconds.
Briefly press Increases the value
the button .
Press the but- Reduces the value
ton for 2–3
seconds.
Briefly press Reduces the value
the button .
Wait 3 - 5 Changes to the next value
seconds.
Wait 10 - 12 Closes the SETUP menu
seconds.
–
Repeatedly press the button
bottom right of the display.
In the LAP display mode, up to 10 lap times can be timed with the
stop watch.
Info
If the lap time continues running after the button
pressed, 9 memory locations are occupied.
Lap 10 must be timed using the button
briefly until CLK appears at the
briefly until CLK appears at the
briefly until LAP appears at the
is
.