KTM 250 EXC TPI 2020 Owner's Manual page 74

12 SERVICE WORK ON THE CHASSIS
72
–
Tighten screw
Guideline
Screw, top steering
stem
S03508-11
–
Tighten screws
Guideline
Screw, top triple
clamp
S03525-10
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
brake caliper
–
Mount the cable ties.
–
Position the brake line, the wiring harness, and the clamp.
Mount and tighten screws
E00375-13
Finishing work
–
Mount the handlebar cushion.
–
Install front fender. (
–
Install the front wheel.
–
Install the headlight mask with the headlight. (
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
–
Check the headlight setting. (
8
.
M8 20 Nm (14.8 lbf ft)
9
.
M8 20 Nm (14.8 lbf ft)
M8 25 Nm (18.4 lbf ft)
bl
.
p. 77)
( p. 111)
p. 75)
p. 127)
bk
.
Loctite ® 243™
p. 125)
p. 65)