Table of Contents
Advertisement
–
Loosen clamps
–
Disconnect plug-in connector
switch.
–
Lift the subframe slightly and secure it.
Info
Pay attention to intake flange
–
Pull throttle valve body
flange, and hang it to the side.
S03503-10
–
Open hose clamp
–
Pull off the angle piece and collect the 2-stroke oil in a suit-
able container.
S03504-10
–
Remove oil screen
–
Check the oil screen for damage.
»
If the oil screen is damaged:
–
Change the oil screen.
S03505-10
–
Insert the oil screen and mount the angle piece with a new
hose clamp.
Hose clamp plier (60029057000)
S03506-10
SERVICE WORK ON THE ENGINE 18
4
of the throttle valve body.
5
of the rear brake light
6
.
7
towards the rear, out of the intake
8
using a screwdriver.
9
and clean it.
145
Advertisement
Table of Contents
