A
1000Base-SX Cable Characteristics
Medium Diameter
SX
62.5 Microns
50 Microns
10/100/1000Base-T Cable Characteristics
Port Type
10Base-T
100/1000Base-T
NOTE: 1000Base-T signaling requires four twisted pairs of Category 5
balanced cabling, as specified in ISO/IEC 11801:1995 and
ANSI/EIA/TIA-568-A (1995) and tested for additional performance using
testing procedures defined in TIA/EIA TSB95.
Performance Specifications
Feature
PCI clock
PCI Data/Address
PCI data burst transfer rate
PCI modes
10/100/1000Base-T
Specifications
Frequency
Shortwave
(850 nanometers)
Shortwave
(850 nanometers)
Connector
Media
RJ-45
Cat. 3, 4, or 5 UTP
RJ-45
Cat. 5 UTP
Specification
66 MHz max
32- and 64-bit
132 MB/second (32-bit bus)
264 MB/second (64-bit bus)
528 MB/second (64-bit bus at 66 MHz)
Master/slave
10/100/1000 Mbps (full duplex)
Cable Type
Multimode
fiber
Multimode
fiber
Maximum Distance
100 meters (325 feet)
100 meters (325 feet)
Operating Range
2 to 275 meters
(6.5 to 902 feet)
2 to 550 meters
(6.5 to 1804 feet)
(in compliance with
IEEE 802.3-1999)
33
Need help?
Do you have a question about the EtherLink 3C985B-SX and is the answer not in the manual?
Questions and answers