ISA Stratos Series Use And Maintenance Manual page 69

12.1 USER INTERFACE
BUTTON KEY SINGLE PRESSING
TO VIEW AND MODIFY THE SET-POINT
1.
2.
3.
4.
TO START A MAUAL DEFROST CYCLE
Press the button (2) for more than 2 seconds.
ON/OFF
Press the button (8) ; the instrument displays "Off" for 5 seconds and the ON/OFF led
comes on.
In this configuration the loads and all the adjustments are disabled. To return the instru-
ment to ON press again button (8).
The OFF condition excludes the instrument from the monitoring without generating any
type of alarm.
N.B.: In OFF the LIGHTS (3) and AUX (X) are active.
TO VIEW THE CURRENT TIME AND DAY
1.
2.
Hur (hur = hour) and hour
Min (Minute = minutes) and minutes
Day (day = day) and current day
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday
Press the button (5) or wait 5 seconds to display the normal temperature.
TO PROGRAM THE TIME AND THE PUBLIC HOLIDAYS
1.
2.
3.
4.
428000939100
Press and release the button SET (6): the Set-Point will immediately be displayed.
The SET led flashes
To modify the value use the buttons (1)and (5).
To save the new Set-Point press the button SET (6) or wait 15 seconds to exit the
programming function.
Press for 3 seconds the button(5).
The following messages will be displayed:
Press for 3 seconds the button(5).
The time and day will be displayed.
Pressing the button SET (6) it will be possible to set the hour, minutes, the current
day and the three public holidays of the week.
To exit press SET (6) + (5), when a parameter is displayed or wait 15 seconds with-
out pressing any key.
STRATOS
69
EN