Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ISA GALAXY TB H205 1P
Summary of Contents for ISA GALAXY TB H205 1P
- Page 1 User Manual GALAXY TB H205 1P [Art. 453TGLX011PTB0L] 2019-05...
- Page 2 GALAXY ISA S.p.A. Via Madonna di Campagna 123 - 06083 Bastia Umbra PG - Italy T. +39 075 801 71 - F. +39 075 800 09 00 - E. customerservice@isaitaly.com www.isaitaly.com 428000914137 GALAXY TB USE AND MAINTENANCE MANUAL...
-
Page 3: Table Of Contents
NOTES / WARNINGS MANUFACTURER WARRANTY TERMS AND CONDITIONS EQUIPMENT IDENTIFICATION COMPOSITION SAFETY SAFETY DEVICES PRESENT FIXED GUARDS ISOLATING THE ELECTRIC POWER SUPPLY RESIDUAL RISKS RISK OF CONTACT WITH LIVE PARTS FIRE EXPLOSIVE ATMOSPHERE SLIPPING TRIPPING 6.10 CIRCUIT FAULTS 6.11 WARNING SIGNS (IF ANY) 6.12 FALLING OBJECTS 6.13... - Page 4 The manual contains symbols to attract the reader's attention and highlight particularly important aspects. The table below illustrates the meaning of the various symbols used. Read the manual Use of protective clothing Maintenance requirement or operations that DANGER must be completed by qualified personnel or Live electrical parts technical assistance centre ATTENTION / DANGER...
-
Page 5: Notes / Warnings
NOTES / WARNINGS NOTE The content of this manual is of technical nature and is owned by ISA. It is forbidden to reproduce, circulate or modify all or part of its content without written consent. Any infringement will be legally pursued. - Page 6 In order not to compromise functionality and safety of the appliance, the particularly complex installation and maintenance activities are not documented in this manual and are performed by specialist ISA S.r.l. technicians. Never use electric devices inside this appliance. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Page 7 INTRODUCTION ISA employs materials of the best quality and as they enter the company, we constantly monitor their storage and the use as part of the manufacturing process to prevent damage, deterioration and failure. All manufacturing elements has been designed and manufactured in order to guarantee reliability and high safety standards.
- Page 8 NOTES / WARNINGS The safety standards reported in this document are intended for trained, authorised personnel responsible for: • Transport • Installation • Operation • Management • Maintenance • Cleaning • Putting out of order • Disposal ATTENTION Reading this manual, albeit in full, is no substitute for adequate user experience.
- Page 9 NOTES / WARNINGS R744 - REFRIGERANT (WHERE APPLICABLE) R744 The refrigerant R744 is a gas that is compatible with the environment. Pay close attention during transport, installation and that the destruction not to damage the refrigerant pipelines. IN THE EVENT OF DAMAGE: Keep flames or sources of ignition away from the appliance.
- Page 10 NOTES / WARNINGS R600a - REFRIGERANT (WHERE APPLICABLE) The refrigerant R600a is a gas that is compatible with the environment, but highly flammable. Pay close attention during transport, installation and dismantling not to damage the refrigerant pipelines. IN THE EVENT OF DAMAGE: Keep flames or sources of ignition away from the appliance.
-
Page 11: Manufacturer
MANUFACTURER ISA S.p.A. www.isaitaly.com Via Madonna di Campagna 123 T. +39 075 801 71 06083 Bastia Umbra PG F. +39 075 800 09 00 Italy E. customerservice@isaitaly.com WARRANTY TERMS AND CONDITIONS The seller's warranty on the equipment is valid for 12 (TWELVE) months from the date of delivery. -
Page 12: Use
This appliance is exclusively intended to: THE DISPLAYING OF PRE-PACKAGED DEEP-FROZEN FOOD AND ICE CREAM The manufacturer is not liable for injury to persons or damage to property or the appliance itself caused by the displaying of products other than those described above. THE APPLIANCE IS INTENDED FOR PROFESSIONAL USE. -
Page 13: Safety
SAFETY The appliance is equipped with safety devices. The buyer is responsible for training personnel using the appliance on the risks, safety devices and general health and safety rules required by the laws of the country where the appliance is in- stalled. -
Page 14: Explosive Atmosphere
EXPLOSIVE ATMOSPHERE The equipment must not be located in an area classified as an explosion risk as per 199/92/EC such as: Zone 0 An area in which there is a permanent, long-lasting or frequently explosive atmosphere made up of a mixture of air and flammable substances in the form of gases, fumes or steam. -
Page 15: Disposal Of Waste Material
DISPOSAL OF WASTE MATERIAL During normal operation, the appliance does not generate any environmental contamination. At the end of its life cycle, or if it is necessary to carry out permanent decommissioning, we recommend the following procedures: DISPOSAL (USER) The symbol, applied to either the product or its packaging, indicates that the product should not be considered as normal domestic waste, but should be taken to a waste collection point for the recycling of electrical and electronic appliances. -
Page 16: Installation
INSTALLATION This manual supplies the information necessary for correct unpacking, procedures for positioning and connection to mains electricity. STORAGE and UNPACKING The appliance, with or without the packaging, should be carefully stored inside warehouses or in areas away from the elements and direct sunlight, at a temperature between 0 and +40 °C. -
Page 17: Wall Mounting/Levelling
WALL MOUNTING/LEVELLING ATTENTION It is fundamental to respect the distances indicated (mm) for correct installation of the appliance. POSITIONING / HANDLING ATTENTION ATTENTION ADJUSTABLE FEET SWIVEL CASTERS The equipment is fitted with height adjustable The equipment is fitted with pivoting wheels feet to for stabilisation on the ground. -
Page 18: Maintenance
MAINTENANCE The Staff in charge of the appliance must control and respect the expiry dates for maintenance, given in the table below, calling the authorised Technical After-sales assistance when indicated. OPERATION FREQUENCY PERSONNEL AUTHORISED USER CLEANING THE EXTERNAL SURFACES CLEANING THE ACCESSIBLE INTERNAL PARTS (without the use of tools) CONTROL POWER SUPPLY CABLE, PLUGS AND / OR ELECTRICAL SOCKETS... -
Page 19: Faults - Technical After-Sales Assistance
If the control unit is set up especially for must R290 refriger- ant, it must only be replaced with an original replacement from ISA. Replace the temperature probes only after check- ing which of the two is not operating efficiently. -
Page 20: Alarms List (Where Present)
10.1 ALARM LIST (WHERE PRESENT) ALARM MEANING OUTPUTS PERSONNEL AUTHORISED Broken thermostat probe. • The alarm starts a few seconds after the probe breaks down; it stops a few Compressor output accord- seconds after the probe starts working again properly. ing to "COn"... -
Page 21: Technical Specifications Rv Tb H150
TECHNICAL SPECIFICATIONS RV TB H150 1338 Length External dimensions Depth 840 / 1453 Height 1591 / 1513 Weight (net) 428000914137 GALAXY TB USE AND MAINTENANCE MANUAL... -
Page 22: Technical Specifications Rv Tb H205
TECHNICAL SPECIFICATIONS RV TB H205 1338 Length External dimensions Depth 840 / 1470 Height 2127 / 2050 Weight (net) 428000914137 GALAXY TB USE AND MAINTENANCE MANUAL... -
Page 23: Technical Plans
11.1 TECHNICAL PLANS RV TB H150 SUPPORT FEET EXHAUST GAS CONNECTION CABLE OUTPUT CONTROL PANEL WHEEL WHEEL WITH BRAKE CUSTOMER SIDE RV TB H205 SUPPORT FEET EXHAUST GAS CONNECTION CABLE OUTPUT CONTROL PANEL WHEEL WHEEL WITH BRAKE CUSTOMER SIDE 428000914137 GALAXY TB USE AND MAINTENANCE MANUAL... -
Page 24: Max Load On Grids
11.2 MAX LOAD ON GRIDS ATTENTION It is absolutely necessary to respect the weight limits indicated for each grid in order to prevent the deformation or breakage of the grids themselves ADJUSTABLE DISPLAY GRIDS The grids can be adjusted in height manually as indicated. -
Page 25: Lighting
11.3 LIGHTING PRESS 428000914137 GALAXY TB USE AND MAINTENANCE MANUAL... -
Page 26: Control Panel
CONTROL PANEL START-UP (ON) SWITCH OFF (OFF) Activate the mains system master switch. Remove the power plug manually. Plug the appliance in at the socket supplied by the customer, ensuring that the plug is fitted with an earth contact and that there are no multiple sockets connected to it;... -
Page 27: User Interface
12.1 USER INTERFACE KEY (PRESSED ONCE) To display or edit the set point. While programming, select a parameter or confirm a value. DOWN ARROW KEY / MANUAL DEFROST FUNCTION While programming, it scrolls through the parameter codes or decreases their value. When pressed for 5 seconds, it starts the manual defrost function. - Page 28 12.1 USER INTERFACE FLASHING • Programming. Output active • Delay against close start-ups. • Programming. Defrosting in progress • Dripping in progress. • Delayed fan start-up in progress. Temperature alarm Unit of measurement Programming Fans active Delayed activation in progress Energy saving in progress Continuous cycle in pro- gress...
- Page 29 12.1 USER INTERFACE SAVE TEMPERATURE (MAXIMUM and MINIMUM) DISPLAY MINIMUM TEMPERATURE Press and release the key; the message "Lo" will be displayed, followed by the minimum temperature reached. Press the key or wait 5 seconds to display the normal temperature again. DISPLAY MAXIMUM TEMPERATURE Press and release the key;...
-
Page 30: Cleaning
CLEANING The materials listed below must be cleaned as follows: STAINLESS STEEL Only use warm water and non-aggressive detergents and then rinse and dry using a soft cloth. ACRYLIC OR POLYCARBONATE Wash with lukewarm water, using a soft cloth or a chamois cloth. Do not use abrasive cloths or sponges. -
Page 31: Condensing Unit
13.2 CONDENSING UNIT Turn off the product, wait a few hours until the equipment of the condensing unit has reached a temperature near to ambient temperature. Remove the front protective structure as indicated. Clean the condensing unit using a suction brush.Clean the condenser with a soft bristle brush; make sure you do not bend the condensing unit springs whilst cleaning it. - Page 32 NordCap GmbH & Co. KG Thalenhorststraße 15 28307 Bremen Hauptsitz (Service, Finanzen & Personal, Lager, IT, Marketing) Telefon: +49 421 48557-0 Telefax: +49 421 488650 E-Mail: bremen@nordcap.de Die NordCap Verkaufsniederlassungen in Deutschland: Nord: Hamburg • Ost: Berlin • Süd: Ingelheim • West: Erkrath...