INSTALLATION - 24v DC - RTS (275 SERIES)
Before installing the shades, verify whether the shade was ordered as standard roll or reverse roll. Though
illustrations in this manual show standard roll shades, the installation for reverse roll shades is the same.
1. Terminate pre-wire with terminal block
2. Install wall bracket/end cap assembly with the supplied screws
for Wall
Mount
Installation - Nano Roll - 24v DC - RTS (275)
+ 24 VDC
V+
- 24 VDC
V-
+
Not
-
Used
G
for Ceiling Mount
Motor side
Header
Use 1/4" magnetic
driver (incl.)
Idler side
5