Phone clip holder dismantle:
Fuselage Battery
Charging Instruction:
1.Connect recharge stand
and computer USB port
by USB charging cable.
2.When the recharge stand connect to
computer,the recharge stand indicator
light is off,then plug the battery into the
recharge stand,and the indicator light
will be on,the indicator light will be off
again when the battery is fully charged.
The charging time is about 90 minutes; Hover flight time
is approximately 5 minutes.
Precautions as follows during charging of battery:
- Avoid placing the active batteries in places with direct exposure,
sunlight and high temperatures. For example, naked light or electrical
equipment installations; otherwise it may cause damages or explosions .
- Avoid immersing the batteries in the water. The batteries shall be
1.Pull up the phone clip holder from
behind the remote control.
-3-
Need help?
Do you have a question about the GYRO REMOTE CONTROL SERIES and is the answer not in the manual?
Questions and answers