Removing A Fortigate-5005Fa2 Module - Fortinet FortiGate FortiGate-5005FA2 Security System Manual

Hardware installation
8

Removing a FortiGate-5005FA2 module

!
!
1
2
FortiGate-5005FA2 Security System Guide
01-30000-0377-20070201
Fully tighten the left and right mounting knots to lock the FortiGate-5005FA2
module into position in the chassis slot.
Mounting
Knot
Tighten
The following procedure describes how to correctly use the FortiGate-5005FA2
mounting components shown in
from a FortiGate-5000 series chassis slot.
To remove a FortiGate-5005FA2 module from a FortiGate-5000 series
chassis
FortiGate-5005FA2 modules are hot swappable. The procedure for removing the
FortiGate-5005FA2 module from a FortiGate-5000 series chassis slot is the same
whether or not the FortiGate-5000 series chassis is powered on or not.
Caution: Do not carry the FortiGate-5005FA2 module by holding the extraction levers.
When inserting or removing the FortiGate-5005FA2 module from a chassis slot, handle the
module by the front panel. The extraction levers are designed for positioning and locking
the FortiGate-5005FA2 module into a slot in a chassis only and should not be used for
handling the module. If the extraction levers become bent or damaged the
FortiGate-5005FA2 module may not align correctly in the chassis slot.
To complete this procedure, you need:
• A FortiGate-5000 series chassis with a FortiGate-5005FA2 module installed
• An electrostatic discharge (ESD) preventive wrist or ankle strap with
connection cord
Caution: FortiGate-5005FA2 modules must be protected from static discharge and
physical shock. Only handle or work with FortiGate-5005FA2 modules at a static-free
workstation. Always wear a grounded electrostatic discharge (ESD) preventive wrist or
ankle strap when handling FortiGate-5005FA2 modules.
Attach the ESD wrist or ankle strap to your wrist or ankle and to an ESD socket or
to a bare metal surface on the chassis or frame.
Disconnect all cables from the FortiGate-5005FA2 module, including all network
cables, the console cable, and any USB cables or keys.
Removing a FortiGate-5005FA2 module
Figure 2 to remove a FortiGate-5005FA2 module
13