4.3
Boot Setup
4.3.1
Boot Configuration
Setup Prompt Timeout
This item is the waiting time when pressing the Setup button. If the Setup button
is not pressed within the set time, the system will continue to boot.
Bootup NumLock State
This item allows users to active Bootup NumLock State function after the system
powers into DOS. The default setting is "On".
–
On: NumLock function is on when system boots.
–
Off: Cursor control is activated for keypad when system boots.
Quiet Boot
If it is set to "Disabled", BIOS will display normal POST information; If it is set to
"Enabled", BIOS will show OEM icon rather than POST information.
Fast Boot
This item allows the BIOS to skip some testing procedures during boot so as to
reduce system boot-up time. The default setting is "Disabled".
MIC-7420 User Manual
Figure 4.17 Boot Setup
42