3.1.4
Installing Ears and Handles
Align two ears with the screw holes on both sides of the chassis, and fasten with
screws. Align two handles with the screw holes on the ears, and fasten with screws.
3.1.5
Installing the add-on card
Please refer to the following instructions to install the add-on card.
1.
Undo the two screws and open the chassis cover of MIC-7420.
2.
Undo the five screws and uninstall the expansion card module.
3.
Install a PCIe or PCI card into the expansion card module.
4.
Replace the expansion card module and replace the chassis cover.
Figure 3.4 Installing the Foot Stand
4
1
2
3
Figure 3.5 Installing the add-on card
5
19
MIC-7420 User Manual