Table of Contents
Advertisement
QUANTUM QVOIP SERIES MANUAL
Function Code 23 Lock-out Count
The system will be disabled in about 60 seconds after pressing invalid access code or swiping invalid card as specified on the Lock-out Count.
1.
Log-in to programming
2. Enter 23 then #
3. Enter 1-9 (default=3) then press #
Function Code 24 Alarm
The system will make have warning alarm if invalid code or card has been enter according to the setting on
1.
Log-in to programming
2. Enter 24 then #
3. Enter
0= disable, 1=disable system for 60 seconds and local beep (default setting), 2= disable system for 60 seconds with no beep
3= call directory (0-9) then press #
Function Code 25 Keypad Beep
Turn the keypad press beep On or Off
1.
Log-in to programming
2. Enter 25 then #
3. Enter 0= off, 1= On (default) then press #
Function Code 26 Door Beep
Turn the door beep On or Off
1.
Log-in to programming
2. Enter 26 then #
3. Enter 0= off, 1= On (default) then press #
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
function code 23.
Advertisement
Table of Contents
